Sunday, November 27, 2011

Tutorial Install Windows 7 Ultimate

Here I will tell you step by step how to install Windows 7 Ultimate for computers that have not installed the operating system. Steps taken were:The process of setting in the BIOS: Turn on the computer, then go into the BIOS for setting up the initial boot OS (operating system)

Change the initial setting boot to the CD ROM / DVD ROM, click F5 to use the keyboard to move the boot sequence

Before you exit or exit the BIOS, insert the DVD Windows 7 Ultimate. Then press the F10 key SAVE & EXIT (depending on the BIOS settings). Then the system will restart the computer: DInstall process of Windows 7 UltimateAfter the restart wait until it says "Press any key to install from CD / DVD ...". after that press any key, so the computer will make the process of booting via the DVD ROM. Wait until you see the picture below:





Arrange Format Language, time, currency and type of keyboard used, suppose we use the time and currency format Indonesia:


Then click Next to continue the installation process. So that will appear in the image below:


Click the install button now to continue the installation process. So it will appear like the picture below:


Wait until you see the process of loading the next process. Checklist chekbox inscribed "I accept the license terms", then click the Next button to continue the installation process. As you can see the picture below:


After that go to the next process. Since this is the installation of computers that have not installed Windows operating system, then select the Custom. If you choose Upgrade means upgrading the old version of windows operating system to windows 7. As the picture below:


Because computers are used is new, then usually there is only one disk partition. Minimal for the installation of windows 7 is 20 GB. Because hard drives are used is 20GB hard drive so it need not be partitioned. Click next to continue the installation process. As shown below:


Wait until windows is finished the installation process. If it has been completed, then the computer will reboot the system. Once done the Windows 7 Ultimate was installed and performed live configuration process


After restarting the computer then the computer will perform the initial setup process before you can use. For the first configuration is the configuration of Username (Username) and the Computer Name (Computer Name), enter according to your likes. Then click the Next button. As shown below:


Then enter the password that will be used for the Username. If it is not going to use a password then just click Next course


After that enter the Serial Number of Windows 7 are listed on the Cover DVD Windows 7 Ultimate. If you are using the trial version, you do not need to enter the product key, simply click the Next button

Choose settings or use in accordance with the recommended settings you want


After that set time in accordance with the current time. When finished click the Next button



After that windows has finished the configuration process, wait until windows desktop prepare for the username that you created earlier

Now you have successfully installed Windows 7 Ultimate. Congratulations use

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Best Web Hosting